3D-Printed Plastic Items

Description

Offering plastic items printed on a 3D printer. The plastic is quite durable. It can be glued with cyanoacrylate and painted if needed. The product color may differ from the one in photo 1. Memory card cases: 1) Holds 8 SD cards + 8 microSD cards = 400 rubles 2) Holds 3 SD cards + 3 microSD cards = 350 rubles 3) Holds 10 microSD cards = 350 rubles 2. Cases for storing 10 button-cell batteries. 1) Case for ZM40H NiMh batteries (equivalent to an LR44 battery). The case for LIR2032 Li-Ion batteries (equivalent to a CR2032 battery) comes in two versions: a box (2) and a cylinder (3), each convenient in its own way. Two cases, your choice = 500 rubles. 3. Fender/mudguard for the GotWay M Super X electric unicycle: a) Standard version, looks like a natural extension of the body 1) = 1000 rubles. b) Mini fender 2) = 400 rubles. c) Version 3) — a test print without the lower clips, with minor fitting marks on the inside; sold as a non-conforming item = 500 rubles. It will stay in place if installed with silicone sealant. Install the mini fender with sealant too, otherwise it will come off due to vibration. The main fender is held by clips and does not come loose from vibration. Apply the sealant so that it can be cut away through the gap if needed; that is, use very little sealant. During installation, squeeze the lower part of the fender and raise it as high as possible. 4. Reverse tweezers. The large one is 110 mm long, the small one 83 mm. The jaws are closed in the normal position. Set of two tweezers = 400 rubles. 5. Stand for a smartphone or tablet. Version 1.